< Previous by Date	Date Index	Next by Date >
< Previous in Thread	Thread Index	Next in Thread >
Re: [reSIProcate] Bug report

From: "Scott Godin" <sgodin@xxxxxxxxxxxxxxx>
Date: Tue, 18 Nov 2008 12:27:23 -0500
Oddly enough I do not see any DUM logs in the log you included - are
you calling dum->process in a timely manner?  If dum does not get
cycles to be able to respond to the BYE - the stack will send out a
100 response.

On Tue, Nov 18, 2008 at 10:19 AM, Karlsson <boost.regex@xxxxxxxxx> wrote:
> Hi Soctt, thanks for your email, yes, I'm using Dum, I was wrote a UA base
> on the Dum,
> about the brach parameter, I will double check my server.
>
>
> On Tue, Nov 18, 2008 at 11:15 PM, Scott Godin <sgodin@xxxxxxxxxxxxxxx>
> wrote:
>>
>> Can you explain your situation in more detail?  Are you using DUM?
>> What is the application that is running ontop of the stack or dum?
>>
>> Note:  The branch parameter in the BYE message does not match the
>> Invite.  This is likely the cause of your issue.
>>
>> Scott
>>
>>
>> On Tue, Nov 18, 2008 at 9:24 AM, Karlsson <boost.regex@xxxxxxxxx> wrote:
>> > Hi, I'm using 1.4.0, and I enctounered a strange issue, the reSIProcate
>> > replied 100 trying for BYE and does not send 200 for BYE
>> >
>> > Please check the Logs below:
>> >
>> >
>> >
>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TransactionUser.cxx:74 | Match!
>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP | 3152 | Helper.cxx:375 |
>> > Helper::makeResponse(SipReq:  INVITE Admin@xxxxxxxxxxxxx:5311
>> > tid=fd77575b072c9a13 cseq=INVITE contact=201@xxxxxxxxxxxxx:5083 / 2
>> > from(wire) code=100 reason=
>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TimerQueue.cxx:85 | Adding timer: Timer Trying tid=fd77575b072c9a13
>> > ms=80
>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TransactionState.cxx:2108 | Send to TU: TU: DialogUsageManager size=0
>> >
>> > INVITE sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
>> > Via: SIP/2.0/UDP
>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-fd77575b072c9a13-1---d8754z-
>> > Max-Forwards: 70
>> > Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
>> > To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>> > From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>> > CSeq: 2 INVITE
>> > Session-Expires: 600;refresher=uac
>> > Min-SE: 90
>> > Allow: ACK, BYE, CANCEL, INVITE, REGISTER, INFO, REFER, SUBSCRIBE,
>> > NOTIFY,
>> > MESSAGE, UPDATE, REGISTER
>> > Content-Type: application/sdp
>> > Supported: replaces, timer
>> > Content-Length: 275
>> >
>> > v=0
>> > o=rtp 243 2 IN IP4 192.168.5.138
>> > s=session
>> > c=IN IP4 1.1.1.1
>> > b=CT:1000
>> > t=0 0
>> > a=sendonly
>> > m=audio 33344 RTP/AVP 8 0 18 111
>> > a=rtpmap:8 PCMA/8000
>> > a=rtpmap:0 PCMU/8000
>> > a=rtpmap:18 G729/8000
>> > a=rtpmap:111 X-nt-inforeq/8000
>> > a=encryption:rejected
>> > a=fmtp:18 annexb=no
>> > DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > TransportSelector.cxx:562 | Looked up source for destination: [ V4
>> > 192.168.5.138:5083 UDP target domain=unspecified mFlowKey=1816 ] -> [ V4
>> > 127.0.0.1:0 UDP target domain=unspecified mFlowKey=1816 ]
>> > sent-by=192.168.5.138 sent-port=5083
>> > DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > TransportSelector.cxx:940 | Transmitting to [ V4 192.168.5.138:5083 UDP
>> > target domain=unspecified mFlowKey=1816 ] tlsDomain= via [ V4
>> > 127.0.0.1:5311
>> > UDP target domain=unspecified mFlowKey=1816 ]
>> >
>> > SIP/2.0 100 Trying
>> > Via: SIP/2.0/UDP
>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-fd77575b072c9a13-1---d8754z-
>> > To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>> > From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>> > CSeq: 2 INVITE
>> > Content-Length: 0
>> >
>> > DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > Transport.cxx:213 | Adding message to tx buffer to: [ V4
>> > 192.168.5.138:5083
>> > UDP target domain=unspecified mFlowKey=1816 ]
>> > INFO | 20081103-113250.421 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TuSelector.cxx:70 | Stats message
>> > WARNING | 20081103-113250.421 | TEST UA | RESIP:STATS | 3152 |
>> > StatisticsMessage.cxx:152 | RESIP:TRANSACTION
>> > TU summary: 22 TRANSPORT 0 TRANSACTION 0 CLIENTTX 2 SERVERTX 1 TIMERS 4
>> > Transaction summary: reqi 596 reqo 866 rspi 750 rspo 491
>> > Details: INVi 122/S121/F0 INVo 243/S243/F0 ACKi 121 ACKo 243 BYEi
>> > 231/S126/F0 BYEo 121/S121/F0 CANi 0/S126/F0 CANo 0/S0/F0 MSGi 0/S0/F0
>> > MSGo
>> > 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 0/S0/F0 REGo 16/S16/F0 PUBi
>> > 0/S0/F0
>> > PUBo 0/S0/F0 SUBi 1/S0/F1 SUBo 1/S0/F1 NOTi 0/S0/F0 NOTo 242/S242/F0
>> > Retransmissions: INVx 0 BYEx 0 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx 0
>> > PUBx 0 SUBx 0 NOTx 0
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
>> > domain=unspecified mFlowKey=1816 ]
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TransactionUser.cxx:66 | Checking if SipReq:  BYE
>> > Admin@xxxxxxxxxxxxx:5311
>> > tid=277f716e3f07722c cseq=BYE contact=201@xxxxxxxxxxxxx:5083 / 3
>> > from(wire)
>> > is for me
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TransactionUser.cxx:71 | Checking rule...
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > MessageFilterRule.cxx:42 | Matching rule for:
>> >
>> > BYE sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
>> > Via: SIP/2.0/UDP
>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
>> > Max-Forwards: 70
>> > Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
>> > To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>> > From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>> > CSeq: 3 BYE
>> > Reason: SIP;description="StateReInvite"
>> > Content-Length: 0
>> >
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TransactionUser.cxx:74 | Match!
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP | 3152 | Helper.cxx:375 |
>> > Helper::makeResponse(SipReq:  BYE Admin@xxxxxxxxxxxxx:5311
>> > tid=277f716e3f07722c cseq=BYE contact=201@xxxxxxxxxxxxx:5083 / 3
>> > from(wire)
>> > code=100 reason=
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TimerQueue.cxx:85 | Adding timer: Timer Trying tid=277f716e3f07722c
>> > ms=3500
>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>> > TransactionState.cxx:2108 | Send to TU: TU: DialogUsageManager size=26
>> >
>> > BYE sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
>> > Via: SIP/2.0/UDP
>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
>> > Max-Forwards: 70
>> > Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
>> > To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>> > From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>> > CSeq: 3 BYE
>> > Reason: SIP;description="StateReInvite"
>> > Content-Length: 0
>> >
>> > DEBUG | 20081103-113305.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
>> > domain=unspecified mFlowKey=1816 ]
>> > DEBUG | 20081103-113306.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
>> > domain=unspecified mFlowKey=1816 ]
>> > DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
>> > domain=unspecified mFlowKey=1816 ]
>> > DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > TransportSelector.cxx:562 | Looked up source for destination: [ V4
>> > 192.168.5.138:5083 UDP target domain=unspecified mFlowKey=1816 ] -> [ V4
>> > 127.0.0.1:0 UDP target domain=unspecified mFlowKey=1816 ]
>> > sent-by=192.168.5.138 sent-port=5083
>> > DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>> > TransportSelector.cxx:940 | Transmitting to [ V4 192.168.5.138:5083 UDP
>> > target domain=unspecified mFlowKey=1816 ] tlsDomain= via [ V4
>> > 127.0.0.1:5311
>> > UDP target domain=unspecified mFlowKey=1816 ]
>> >
>> > SIP/2.0 100 Trying
>> > Via: SIP/2.0/UDP
>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
>> > To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>> > From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>> > CSeq: 3 BYE
>> > Content-Length: 0
>> > _______________________________________________
>> > resiprocate-devel mailing list
>> > resiprocate-devel@xxxxxxxxxxxxxxx
>> > https://list.resiprocate.org/mailman/listinfo/resiprocate-devel
>> >
>
>
Follow-Ups:
- Re: [reSIProcate] Bug report
  - From: Karlsson
References:
- [reSIProcate] Bug report
  - From: Karlsson
- Re: [reSIProcate] Bug report
  - From: Scott Godin
- Re: [reSIProcate] Bug report
  - From: Karlsson
Prev by Date: Re: [reSIProcate] Bug report
Next by Date: Re: [reSIProcate] potential memory leak on INVITE
Previous by thread: Re: [reSIProcate] Bug report
Next by thread: Re: [reSIProcate] Bug report
Index(es):
- Date
- Thread