On Tue, Nov 18, 2008 at 10:37 AM, Karlsson <
boost.regex@xxxxxxxxx> wrote:
> Hi Soctt, I have using eyeball call to Bria, they all are counterpath
> products, and I captured the SIP message by wireshark.
> In case the branch parameter does not match in INVITE and BYE message, I
> think there hasn't requires match it with BYE and INVITE?
>
> Thanks
>
>
> On Tue, Nov 18, 2008 at 11:19 PM, Karlsson <
boost.regex@xxxxxxxxx> wrote:
>>
>> Hi Soctt, thanks for your email, yes, I'm using Dum, I was wrote a UA base
>> on the Dum,
>> about the brach parameter, I will double check my server.
>>
>>
>> On Tue, Nov 18, 2008 at 11:15 PM, Scott Godin <
sgodin@xxxxxxxxxxxxxxx>
>> wrote:
>>>
>>> Can you explain your situation in more detail? Are you using DUM?
>>> What is the application that is running ontop of the stack or dum?
>>>
>>> Note: The branch parameter in the BYE message does not match the
>>> Invite. This is likely the cause of your issue.
>>>
>>> Scott
>>>
>>>
>>> On Tue, Nov 18, 2008 at 9:24 AM, Karlsson <
boost.regex@xxxxxxxxx> wrote:
>>> > Hi, I'm using 1.4.0, and I enctounered a strange issue, the reSIProcate
>>> > replied 100 trying for BYE and does not send 200 for BYE
>>> >
>>> > Please check the Logs below:
>>> >
>>> >
>>> >
>>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TransactionUser.cxx:74 | Match!
>>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP | 3152 | Helper.cxx:375 |
>>> > Helper::makeResponse(SipReq: INVITE
Admin@xxxxxxxxxxxxx:5311>>> > tid=fd77575b072c9a13 cseq=INVITE contact=
201@xxxxxxxxxxxxx:5083 / 2
>>> > from(wire) code=100 reason=
>>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TimerQueue.cxx:85 | Adding timer: Timer Trying tid=fd77575b072c9a13
>>> > ms=80
>>> > DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TransactionState.cxx:2108 | Send to TU: TU: DialogUsageManager size=0
>>> >
>>> > INVITE
sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
>>> > Via: SIP/2.0/UDP
>>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-fd77575b072c9a13-1---d8754z-
>>> > Max-Forwards: 70
>>> > Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
>>> > To: <
sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>>> > From: <
sip:201@xxxxxxxxxxxx>;tag=7b530979
>>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>>> > CSeq: 2 INVITE
>>> > Session-Expires: 600;refresher=uac
>>> > Min-SE: 90
>>> > Allow: ACK, BYE, CANCEL, INVITE, REGISTER, INFO, REFER, SUBSCRIBE,
>>> > NOTIFY,
>>> > MESSAGE, UPDATE, REGISTER
>>> > Content-Type: application/sdp
>>> > Supported: replaces, timer
>>> > Content-Length: 275
>>> >
>>> > v=0
>>> > o=rtp 243 2 IN IP4
192.168.5.138
>>> > s=session
>>> > c=IN IP4
1.1.1.1>>> > b=CT:1000
>>> > t=0 0
>>> > a=sendonly
>>> > m=audio 33344 RTP/AVP 8 0 18 111
>>> > a=rtpmap:8 PCMA/8000
>>> > a=rtpmap:0 PCMU/8000
>>> > a=rtpmap:18 G729/8000
>>> > a=rtpmap:111 X-nt-inforeq/8000
>>> > a=encryption:rejected
>>> > a=fmtp:18 annexb=no
>>> > DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > TransportSelector.cxx:562 | Looked up source for destination: [ V4
>>> >
192.168.5.138:5083 UDP target domain=unspecified mFlowKey=1816 ] -> [
>>> > V4
>>> >
127.0.0.1:0 UDP target domain=unspecified mFlowKey=1816 ]
>>> > sent-by=
192.168.5.138 sent-port=5083
>>> > DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > TransportSelector.cxx:940 | Transmitting to [ V4
192.168.5.138:5083 UDP
>>> > target domain=unspecified mFlowKey=1816 ] tlsDomain= via [ V4
>>> >
127.0.0.1:5311>>> > UDP target domain=unspecified mFlowKey=1816 ]
>>> >
>>> > SIP/2.0 100 Trying
>>> > Via: SIP/2.0/UDP
>>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-fd77575b072c9a13-1---d8754z-
>>> > To: <
sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>>> > From: <
sip:201@xxxxxxxxxxxx>;tag=7b530979
>>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>>> > CSeq: 2 INVITE
>>> > Content-Length: 0
>>> >
>>> > DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > Transport.cxx:213 | Adding message to tx buffer to: [ V4
>>> >
192.168.5.138:5083>>> > UDP target domain=unspecified mFlowKey=1816 ]
>>> > INFO | 20081103-113250.421 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TuSelector.cxx:70 | Stats message
>>> > WARNING | 20081103-113250.421 | TEST UA | RESIP:STATS | 3152 |
>>> > StatisticsMessage.cxx:152 | RESIP:TRANSACTION
>>> > TU summary: 22 TRANSPORT 0 TRANSACTION 0 CLIENTTX 2 SERVERTX 1 TIMERS 4
>>> > Transaction summary: reqi 596 reqo 866 rspi 750 rspo 491
>>> > Details: INVi 122/S121/F0 INVo 243/S243/F0 ACKi 121 ACKo 243 BYEi
>>> > 231/S126/F0 BYEo 121/S121/F0 CANi 0/S126/F0 CANo 0/S0/F0 MSGi 0/S0/F0
>>> > MSGo
>>> > 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 0/S0/F0 REGo 16/S16/F0 PUBi
>>> > 0/S0/F0
>>> > PUBo 0/S0/F0 SUBi 1/S0/F1 SUBo 1/S0/F1 NOTi 0/S0/F0 NOTo 242/S242/F0
>>> > Retransmissions: INVx 0 BYEx 0 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx
>>> > 0
>>> > PUBx 0 SUBx 0 NOTx 0
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > Transport.cxx:287 | incoming from: [ V4
192.168.5.138:5083 UDP target
>>> > domain=unspecified mFlowKey=1816 ]
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TransactionUser.cxx:66 | Checking if SipReq: BYE
>>> >
Admin@xxxxxxxxxxxxx:5311>>> > tid=277f716e3f07722c cseq=BYE contact=
201@xxxxxxxxxxxxx:5083 / 3
>>> > from(wire)
>>> > is for me
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TransactionUser.cxx:71 | Checking rule...
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > MessageFilterRule.cxx:42 | Matching rule for:
>>> >
>>> > BYE
sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
>>> > Via: SIP/2.0/UDP
>>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
>>> > Max-Forwards: 70
>>> > Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
>>> > To: <
sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>>> > From: <
sip:201@xxxxxxxxxxxx>;tag=7b530979
>>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>>> > CSeq: 3 BYE
>>> > Reason: SIP;description="StateReInvite"
>>> > Content-Length: 0
>>> >
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TransactionUser.cxx:74 | Match!
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP | 3152 | Helper.cxx:375 |
>>> > Helper::makeResponse(SipReq: BYE
Admin@xxxxxxxxxxxxx:5311>>> > tid=277f716e3f07722c cseq=BYE contact=
201@xxxxxxxxxxxxx:5083 / 3
>>> > from(wire)
>>> > code=100 reason=
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TimerQueue.cxx:85 | Adding timer: Timer Trying tid=277f716e3f07722c
>>> > ms=3500
>>> > DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
>>> > TransactionState.cxx:2108 | Send to TU: TU: DialogUsageManager size=26
>>> >
>>> > BYE
sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
>>> > Via: SIP/2.0/UDP
>>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
>>> > Max-Forwards: 70
>>> > Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
>>> > To: <
sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>>> > From: <
sip:201@xxxxxxxxxxxx>;tag=7b530979
>>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>>> > CSeq: 3 BYE
>>> > Reason: SIP;description="StateReInvite"
>>> > Content-Length: 0
>>> >
>>> > DEBUG | 20081103-113305.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > Transport.cxx:287 | incoming from: [ V4
192.168.5.138:5083 UDP target
>>> > domain=unspecified mFlowKey=1816 ]
>>> > DEBUG | 20081103-113306.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > Transport.cxx:287 | incoming from: [ V4
192.168.5.138:5083 UDP target
>>> > domain=unspecified mFlowKey=1816 ]
>>> > DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > Transport.cxx:287 | incoming from: [ V4
192.168.5.138:5083 UDP target
>>> > domain=unspecified mFlowKey=1816 ]
>>> > DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > TransportSelector.cxx:562 | Looked up source for destination: [ V4
>>> >
192.168.5.138:5083 UDP target domain=unspecified mFlowKey=1816 ] -> [
>>> > V4
>>> >
127.0.0.1:0 UDP target domain=unspecified mFlowKey=1816 ]
>>> > sent-by=
192.168.5.138 sent-port=5083
>>> > DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
>>> > TransportSelector.cxx:940 | Transmitting to [ V4
192.168.5.138:5083 UDP
>>> > target domain=unspecified mFlowKey=1816 ] tlsDomain= via [ V4
>>> >
127.0.0.1:5311>>> > UDP target domain=unspecified mFlowKey=1816 ]
>>> >
>>> > SIP/2.0 100 Trying
>>> > Via: SIP/2.0/UDP
>>> > 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
>>> > To: <
sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
>>> > From: <
sip:201@xxxxxxxxxxxx>;tag=7b530979
>>> > Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
>>> > CSeq: 3 BYE
>>> > Content-Length: 0
>>> > _______________________________________________
>>> > resiprocate-devel mailing list
>>> >
resiprocate-devel@xxxxxxxxxxxxxxx
>>> >
https://list.resiprocate.org/mailman/listinfo/resiprocate-devel>>> >
>>
>
>