Re: [reSIProcate] Bug report
Can you explain your situation in more detail? Are you using DUM?
What is the application that is running ontop of the stack or dum?
Note: The branch parameter in the BYE message does not match the
Invite. This is likely the cause of your issue.
Scott
On Tue, Nov 18, 2008 at 9:24 AM, Karlsson <boost.regex@xxxxxxxxx> wrote:
> Hi, I'm using 1.4.0, and I enctounered a strange issue, the reSIProcate
> replied 100 trying for BYE and does not send 200 for BYE
>
> Please check the Logs below:
>
>
>
> DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TransactionUser.cxx:74 | Match!
> DEBUG | 20081103-113224.859 | TEST UA | RESIP | 3152 | Helper.cxx:375 |
> Helper::makeResponse(SipReq: INVITE Admin@xxxxxxxxxxxxx:5311
> tid=fd77575b072c9a13 cseq=INVITE contact=201@xxxxxxxxxxxxx:5083 / 2
> from(wire) code=100 reason=
> DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TimerQueue.cxx:85 | Adding timer: Timer Trying tid=fd77575b072c9a13 ms=80
> DEBUG | 20081103-113224.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TransactionState.cxx:2108 | Send to TU: TU: DialogUsageManager size=0
>
> INVITE sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
> Via: SIP/2.0/UDP
> 192.168.5.138:5083;branch=z9hG4bK-d8754z-fd77575b072c9a13-1---d8754z-
> Max-Forwards: 70
> Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
> To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
> From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
> Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
> CSeq: 2 INVITE
> Session-Expires: 600;refresher=uac
> Min-SE: 90
> Allow: ACK, BYE, CANCEL, INVITE, REGISTER, INFO, REFER, SUBSCRIBE, NOTIFY,
> MESSAGE, UPDATE, REGISTER
> Content-Type: application/sdp
> Supported: replaces, timer
> Content-Length: 275
>
> v=0
> o=rtp 243 2 IN IP4 192.168.5.138
> s=session
> c=IN IP4 1.1.1.1
> b=CT:1000
> t=0 0
> a=sendonly
> m=audio 33344 RTP/AVP 8 0 18 111
> a=rtpmap:8 PCMA/8000
> a=rtpmap:0 PCMU/8000
> a=rtpmap:18 G729/8000
> a=rtpmap:111 X-nt-inforeq/8000
> a=encryption:rejected
> a=fmtp:18 annexb=no
> DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
> TransportSelector.cxx:562 | Looked up source for destination: [ V4
> 192.168.5.138:5083 UDP target domain=unspecified mFlowKey=1816 ] -> [ V4
> 127.0.0.1:0 UDP target domain=unspecified mFlowKey=1816 ]
> sent-by=192.168.5.138 sent-port=5083
> DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
> TransportSelector.cxx:940 | Transmitting to [ V4 192.168.5.138:5083 UDP
> target domain=unspecified mFlowKey=1816 ] tlsDomain= via [ V4 127.0.0.1:5311
> UDP target domain=unspecified mFlowKey=1816 ]
>
> SIP/2.0 100 Trying
> Via: SIP/2.0/UDP
> 192.168.5.138:5083;branch=z9hG4bK-d8754z-fd77575b072c9a13-1---d8754z-
> To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
> From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
> Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
> CSeq: 2 INVITE
> Content-Length: 0
>
> DEBUG | 20081103-113224.953 | TEST UA | RESIP:TRANSPORT | 3152 |
> Transport.cxx:213 | Adding message to tx buffer to: [ V4 192.168.5.138:5083
> UDP target domain=unspecified mFlowKey=1816 ]
> INFO | 20081103-113250.421 | TEST UA | RESIP:TRANSACTION | 3152 |
> TuSelector.cxx:70 | Stats message
> WARNING | 20081103-113250.421 | TEST UA | RESIP:STATS | 3152 |
> StatisticsMessage.cxx:152 | RESIP:TRANSACTION
> TU summary: 22 TRANSPORT 0 TRANSACTION 0 CLIENTTX 2 SERVERTX 1 TIMERS 4
> Transaction summary: reqi 596 reqo 866 rspi 750 rspo 491
> Details: INVi 122/S121/F0 INVo 243/S243/F0 ACKi 121 ACKo 243 BYEi
> 231/S126/F0 BYEo 121/S121/F0 CANi 0/S126/F0 CANo 0/S0/F0 MSGi 0/S0/F0 MSGo
> 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 0/S0/F0 REGo 16/S16/F0 PUBi 0/S0/F0
> PUBo 0/S0/F0 SUBi 1/S0/F1 SUBo 1/S0/F1 NOTi 0/S0/F0 NOTo 242/S242/F0
> Retransmissions: INVx 0 BYEx 0 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx 0
> PUBx 0 SUBx 0 NOTx 0
> DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSPORT | 3152 |
> Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
> domain=unspecified mFlowKey=1816 ]
> DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TransactionUser.cxx:66 | Checking if SipReq: BYE Admin@xxxxxxxxxxxxx:5311
> tid=277f716e3f07722c cseq=BYE contact=201@xxxxxxxxxxxxx:5083 / 3 from(wire)
> is for me
> DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TransactionUser.cxx:71 | Checking rule...
> DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> MessageFilterRule.cxx:42 | Matching rule for:
>
> BYE sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
> Via: SIP/2.0/UDP
> 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
> Max-Forwards: 70
> Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
> To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
> From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
> Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
> CSeq: 3 BYE
> Reason: SIP;description="StateReInvite"
> Content-Length: 0
>
> DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TransactionUser.cxx:74 | Match!
> DEBUG | 20081103-113304.859 | TEST UA | RESIP | 3152 | Helper.cxx:375 |
> Helper::makeResponse(SipReq: BYE Admin@xxxxxxxxxxxxx:5311
> tid=277f716e3f07722c cseq=BYE contact=201@xxxxxxxxxxxxx:5083 / 3 from(wire)
> code=100 reason=
> DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TimerQueue.cxx:85 | Adding timer: Timer Trying tid=277f716e3f07722c ms=3500
> DEBUG | 20081103-113304.859 | TEST UA | RESIP:TRANSACTION | 3152 |
> TransactionState.cxx:2108 | Send to TU: TU: DialogUsageManager size=26
>
> BYE sip:Admin@xxxxxxxxxxxxx:5311 SIP/2.0
> Via: SIP/2.0/UDP
> 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
> Max-Forwards: 70
> Contact: <sip:201@xxxxxxxxxxxxx:5083;rinstance=371636721b176a68>
> To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
> From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
> Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
> CSeq: 3 BYE
> Reason: SIP;description="StateReInvite"
> Content-Length: 0
>
> DEBUG | 20081103-113305.359 | TEST UA | RESIP:TRANSPORT | 3152 |
> Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
> domain=unspecified mFlowKey=1816 ]
> DEBUG | 20081103-113306.359 | TEST UA | RESIP:TRANSPORT | 3152 |
> Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
> domain=unspecified mFlowKey=1816 ]
> DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
> Transport.cxx:287 | incoming from: [ V4 192.168.5.138:5083 UDP target
> domain=unspecified mFlowKey=1816 ]
> DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
> TransportSelector.cxx:562 | Looked up source for destination: [ V4
> 192.168.5.138:5083 UDP target domain=unspecified mFlowKey=1816 ] -> [ V4
> 127.0.0.1:0 UDP target domain=unspecified mFlowKey=1816 ]
> sent-by=192.168.5.138 sent-port=5083
> DEBUG | 20081103-113308.359 | TEST UA | RESIP:TRANSPORT | 3152 |
> TransportSelector.cxx:940 | Transmitting to [ V4 192.168.5.138:5083 UDP
> target domain=unspecified mFlowKey=1816 ] tlsDomain= via [ V4 127.0.0.1:5311
> UDP target domain=unspecified mFlowKey=1816 ]
>
> SIP/2.0 100 Trying
> Via: SIP/2.0/UDP
> 192.168.5.138:5083;branch=z9hG4bK-d8754z-277f716e3f07722c-1---d8754z-
> To: <sip:Admin@xxxxxxxxxxxx>;tag=ca7c4849
> From: <sip:201@xxxxxxxxxxxx>;tag=7b530979
> Call-ID: MTEwYTVjZWFkYmMxNjQ5MDhmMTJjY2NmNjQ1ZTI1ODc.
> CSeq: 3 BYE
> Content-Length: 0
> _______________________________________________
> resiprocate-devel mailing list
> resiprocate-devel@xxxxxxxxxxxxxxx
> https://list.resiprocate.org/mailman/listinfo/resiprocate-devel
>