Re: [reSIProcate-users] how to set the re-register time

[slgodin@xxxxxxxxx]

I highly recommend you take a close look at the dum/test/basicCall example if you haven't already done so.  It should help with your other question as well.

Try registering with your Asterisk from it and see if you get the same results.

Scott

Sent from my iPhone

On Dec 5, 2016, at 1:15 PM, Francesco Lamonica <alienpenguin@xxxxxxxxx> wrote:

Hello Scott

thanks for your reply.

I am running the DUM and stack on their own InterruptableStackThread as in the examples (or at least i do hope i have done it right). In that thread i do have a timer that executes "while (dum->process(100);)"

Do you have any other ideas?

thanks again

On Thu, Dec 1, 2016 at 3:51 PM, Scott Godin <sgodin@xxxxxxxxxxxxxxx> wrote:

It sounds to me like your processing loop is bad.  You need to be constantly giving DUM and the stack process cycles.  It's not good to only process DUM events every 100ms.  Please see this page:

http://www.resiprocate.org/DUM_Threading

Scott

On Thu, Dec 1, 2016 at 8:47 AM, Francesco Lamonica <alienpenguin@xxxxxxxxx> wrote:

Thanks both for suggestions, i will try those :)

Now i am asking for ideas on what to look for to solve a little register problem. 

I have this simple app that registers to an asterisk; it is configured to process DUM events  every 100ms with a timeout of 100ms.

Whenever a reply to a REGISTER is sent back from asterisk it takes around 300ms to my app to reply with an authenticated REGISTER with the correct response for digest authentication, so far so good.

If i leave the application open (no screensaver, no standby, etc.) after 3 re-registration in 15 minutes (asterisk responds to REGISTER with an expire of 300s) i am not able to register anymore.

The reason is that after 15min when a REGISTER is sent, my app responds to the 401 from asterisk after 10secs!

Asterisk, on its side,  destroys the dialog for the REGISTER request after 6400ms hence i am not able to register anymore.

Do you have any ideas on what might be going on?

i am testing this with resiprocate 1.10.2 on mac os x yosemite.

thanks a lot.

On Wed, Nov 30, 2016 at 6:23 PM, Scott Godin <sgodin@xxxxxxxxxxxxxxx> wrote:

You can start your own timer and use ClientRegistration::requestRefresh() instead.

Scott

On Wed, Nov 30, 2016 at 11:10 AM, Francesco Lamonica <alienpenguin@xxxxxxxxx> wrote:

Hello there,

is there a way to set the time when the dum will send a re-register?

it seems that the default for dum is to send 15sec before registration ends.

is it possible to send it before?

thanks

_______________________________________________
resiprocate-users mailing list
resiprocate-users@resiprocate.org
List Archive: http://list.resiprocate.org/archive/resiprocate-users/