reSIProcate

Mailing Lists

Source Code

< Previous by Date Date Index Next by Date >
< Previous in Thread Thread Index Next in Thread >

Re: [reSIProcate-users] SIP Registration Renewal/"Keep Alive"

Yeah, that's it, just make sure to call run after your stack is configured. 

Best regards,
Byron Campen


Thanks Byron.

Since my application has a lot going on in the main thread, a separate
StackThread sounds like a good idea.

Is this how it would work:

On startup:
        :
        StackThread st(myStack);
        St.run();
Then in my main application idle loop, I would call dumUac->Process () ? 


Thanks,
Ali Ziad


-----Original Message-----
From: Byron Campen [mailto:bcampen@xxxxxxxxxxxx]
Sent: Wednesday, January 09, 2008 1:11 PM
To: Ali Ziad
Cc: resiprocate-users@xxxxxxxxxxxxxxx
Subject: Re: [reSIProcate-users] SIP Registration Renewal/"Keep Alive"

        StackThread will give the stack its own thread, and this is
generally the recommended way to use the stack. Since all
communication into and out-of the stack is threadsafe, this should
not upset the thread-safety of your app.

Best regards,
Byron Campen
I am integrating ReSIProcate into an existing application which has to 
attend to other functions and cannot be held up for a long time
waiting for
SIP events.

So, In my global application idle loop, I call the stack processing
sequence
with the minimal timeout of 1ms for the select, assuming I will
revisit it
within the second for the next avail message.

        int someInt=0;

        if (!uacShutdownHandler->dumShutDown)
        {
                FdSet fdset;
                stackUac->buildFdSet(fdset);
                int err = fdset.selectMilliSeconds(resipMin((int)
stackUac->getTimeTillNextProcessMS(), 1));
              assert ( err != -1 );
                stackUac->process(fdset);
                while(dumUac->process());
        }

Spending too much time waiting here (50ms) was interfering with the
RTP
media timing.

Is using StackThread a reliable/recommended approach? How does it
interact
with my DUM and Event handler classes?

-ali


-----Original Message-----
From: Byron Campen [mailto:bcampen@xxxxxxxxxxxx]
Sent: Wednesday, January 09, 2008 11:08 AM
To: Ali Ziad
Cc: resiprocate-users@xxxxxxxxxxxxxxx
Subject: Re: [reSIProcate-users] SIP Registration Renewal/"Keep Alive" 

        It looks like the stack thread is being cycle-starved. Note the very

long time between the sending of the second REGISTER request from DUM
(at 10:00:33), and the next time the transaction state machine fires
up (10:00:40), in the logs below.

        Are you using a StackThread to give cycles to the stack? Or are you

using some other method?

Best regards,
Byron Campen



DEBUG | 20080109-100033.000 | Sytech:ResipLib | RESIP:DUM | 2704 |
DialogUsageManager.cxx:832 | SEND:

REGISTER sip:192.168.10.212 SIP/2.0

Via: SIP/2.0/ ;branch=z9hG4bK-d8754z-216c1c5d9e22083a-1---
d8754z-;rport

Max-Forwards: 70

Contact: <sip:ali_pc;rinstance=e5646707bb14480b>

To: <sip:ali_pc@xxxxxxxxxxxxxx>

From: <sip:ali_pc@xxxxxxxxxxxxxx>;tag=a70cf259

Call-ID: ZTM4NjgwYWQ3M2VlOTQxNDE2MmU1YTU5ZjExOWRjZDY.

CSeq: 3 REGISTER

Expires: 70

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, UPDATE

Proxy-Authorization: Digest
username="ali_pc",realm="192.168.10.212",nonce="12844364358:7c2c4f86 6 
e
569c98
c2cf13c15744fb03",uri="sip:
192.168.10.212",response="e2831ec987ad218b7774b20
ae402516f",cnonce="04756c683133255f",nc=00000002,qop=auth-
int,algorithm=MD5

Content-Length: 0




DEBUG | 20080109-100033.000 | Sytech:ResipLib | RESIP:DUM | 2704 |
DialogId.cxx:50 | DialogId::DialogId:
ZTM4NjgwYWQ3M2VlOTQxNDE2MmU1YTU5ZjExOWRjZDY.-a70cf259-
DEBUG | 20080109-100033.000 | Sytech:ResipLib | RESIP:DUM | 2704 |
DialogUsageManager.cxx:963 | Send: SipReq:  REGISTER 192.168.10.212
tid=216c1c5d9e22083a cseq=REGISTER contact=ali_pc / 3 from(tu)
DEBUG | 20080109-100033.000 | Sytech:ResipLib | RESIP | 2704 |
SipStack.cxx:307 | SEND: SipReq:  REGISTER 192.168.10.212
tid=216c1c5d9e22083a cseq=REGISTER contact=ali_pc / 3 from(tu)
DEBUG | 20080109-100040.437 | Sytech:ResipLib | RESIP:TRANSACTION |
2704 |
TimerQueue.cxx:85 | Adding timer: Timer F tid=216c1c5d9e22083a
ms=32000
DEBUG | 20080109-100040.437 | Sytech:ResipLib | RESIP:TRANSPORT |
2704 |
TransportSelector.cxx:275 | Looking up dns entries for sip:
192.168.10.212
DEBUG | 20080109-100040.437 | Sytech:ResipLib | RESIP:DNS | 2704 |
DnsResult.cxx:221 | DnsResult::lookup sip:192.168.10.212
DEBUG | 20080109-100040.437 | Sytech:ResipLib | RESIP:DNS | 2704 |
DnsResult.cxx:405 | Numeric result so return immediately: [ V4

Attachment: smime.p7s
Description: S/MIME cryptographic signature