< Previous by Date Date Index Next by Date >
< Previous in Thread Thread Index Next in Thread >

Re: [reSIProcate] Leaking transactions


For server transactions, the TU is responsible for sending a response to the stack no matter what. Failure to do so will cause that transaction to hang around indefinitely. The stack ensures that the request is well-formed enough to at least forge a failure response before passing the request to the TU, meaning that it is possible to give some sort of response to everything that is passed up.

This is, as far as I can tell, the number one cause of leaks in resip-based applications.

Best regards,
Byron Campen

Would the same thing be true on the server side. Namely when resip send tries to pass on a BYE to the B-side and the BSide does not reponsd.

 

I see that resip is re-transmitting (that’s a good thing) After the internal timeout it stops retransmitting (another good thing) however the transaction count is not decremented (isn’t this a bad thing?).

 

Even after 15 minutes, the statistics message displays the following:

WARNING | 20070521-043519.633 | xxxxxx | repro | RESIP:STATS | 12134 | 3054312368 | StatisticsMessage.cxx:152 | RESIP:TRANSACTION

TU summary: 0 TRANSPORT 0 TRANSACTION 0 CLIENTTX 0 SERVERTX 1 TIMERS 0

Transaction summary: reqi 1 reqo 11 rspi 0 rspo 1

Details: INVi 0/S0/F0 INVo 0/S0/F0 ACKi 0 ACKo 0 BYEi 1/S0/F0 BYEo 1/S0/F0 CANi 0/S0/F0 CANo 0/S0/F0 MSGi 0/S0/F0 MSGo 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 0/S0/F0 REGo 0/S0/F0 PUBi 0/S0/F0 PUBo 0/S0/F0 SUBi 0/S0/F0 SUBo 0/S0/F0 NOTi 0/S0/F0 NOTo 0/S0/F0

Retransmissions: INVx 0 BYEx 10 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx 0 PUBx 0 SUBx 0 NOTx 0

 

What can the A Side do? Resip already sent out the OK to the A side and it has no idea that the B-side never esponded?

 

 


From: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxxx [mailto:resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Scott Godin
Sent: Tuesday, May 08, 2007 4:36 PM
To: Greg Inglis; resiprocate-devel@xxxxxxxxxxxxxxxxxxxx
Subject: Re: [reSIProcate] Leaking transactions

 

I agree it needs to be documented better.  : )

 

BTW:  You don’t really need to do the mMyClientInviteSessionHanlde.isValid and the isEarly check – it is OK to call AppDialogSet::end() in both cases – it will dispatch the CANCEL vs BYE appropriately.

 

Scott

 

From: Greg Inglis [mailto:Greg.Inglis@xxxxxxxxxxxxxxxxxxxxxx]
Sent: Tuesday, May 08, 2007 9:31 AM
To: Scott Godin; resiprocate-devel@xxxxxxxxxxxxxxxxxxxx
Subject: RE: [reSIProcate] Leaking transactions

 

Scott, thanks for that. I changed my UAC app to do the following as you suggested and the memory leak has gone away:

 

MyAppDialogSet::EndSession()

{

    if (mMyClientInviteSessionHandle.isValid())

    {

        if (mMyClientInviteSessionHandle->isEarly())

        {

            // send CANCEL

            AppDialogSet::end();

        }

        else

        {

            // send BYE

            mMyClientInviteSessionHandle->end();

        }

    }

}

 

I forgot to mention, previously in my leaky app (where I was calling ClientInviteSession::end() only), I was still getting the expected AppDialogSet::destroy() call back from the DUM at the end of each session. This is a bit misleading as it implied the session had successfully 'ended' which wasn't the case?  This behaviour isn't at all obvious.

 

Thanks for your help

 

 


From: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxxx [mailto:resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Scott Godin
Sent: 03 May 2007 13:46
To: Greg Inglis; resiprocate-devel@xxxxxxxxxxxxxxxxxxxx
Subject: Re: [reSIProcate] Leaking transactions

Hmm – calling ClientInviteSession::end() will cause a BYE to sent, and the original INVITE transaction should still be active, since the invite was not CANCELED.   I would have thought that the transaction state would have been cleaned up after some timeout – but there may currently be a requirement for the application to cancel the transaction completely since you did receive a provisional response.

 

You could try switching your call to AppDialogSet()->end() or DialogUsageManager::end(), which should send a CANCEL instead to see if the problem goes away.

 

Scott

 

From: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxxx [mailto:resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Greg Inglis
Sent: Thursday, May 03, 2007 8:14 AM
To: resiprocate-devel@xxxxxxxxxxxxxxxxxxxx
Subject: [reSIProcate] Leaking transactions

 

Hi there,

 

I am getting a memory leak in my application when I end my UAC session while the session is in a 'UAC_Early' state

i.e. I've got a '180 Ringing' from the remote UAS endpoint but I haven't received a '200 OK' as yet.

 

I'm getting the following statistics message from the stack afterwards:

 

TU summary: 0 TRANSPORT 0 TRANSACTION 0 CLIENTTX 1 SERVERTX 0 TIMERS 0
Transaction summary: reqi 0 reqo 6 rspi 8 rspo 0
Details: INVi 0/S0/F0 INVo 2/S0/F1 ACKi 0 ACKo 1 BYEi 0/S0/F0 BYEo 1/S1/F0 CANi 0/S0/F0 CANo 0/S0/F0 MSGi 0/S0/F0 MSGo 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 0/S0/F0 REGo 2/S1/F1 PUBi 0/S0/F0 PUBo 0/S0/F0 SUBi 0/S0/F0 SUBo 0/S0/F0 NOTi 0/S0/F0 NOTo 0/S0/F0
Retransmissions: INVx 0 BYEx 0 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx 0 PUBx 0 SUBx 0 NOTx 0

The 'CLIENTTX 1' in the TU summary doesn't go away no matter how long I wait - I assume this means a transaction has leaked somehow?

I am ending the session by calling ClientInviteSession::end() and subsequently calling process() on the stack and DUM - is there some step I am missing here?

 

I'm using reSiprocate 1.1 built on VC8 SP1 and my SIP proxy is asterisk.

 

Any help would be appreciated

 

Greg Inglis

Software Engineer

Telephonetics VIP Ltd
"
making sound 
          business
sense"

Simply dial +44 (0) 1442 242 242 and ask for me by name.

For Technical Support / Fault Logging please use support@xxxxxxxxxxxxxxxxxxxxxx

Emails to my personal address will not be managed in my absence.

www.telephoneticsVIP.co.uk

Providing innovative hosted and customer premises speech recognition and voice automation solutions.

Winner of the National Business Awards (SE Region) Business Innovation of the Year 2004 & 2005 and Dacorum Business Of The Year Award 2003 & 2006.

Disclaimer:
The disclaimer available at
http://www.telephoneticsVIP.co.uk/telephonetics/emaildisclaimer.jsp or by sending email to <mailto:email-disclaimer@xxxxxxxxxxxxxxxxxxxxxx> applies to this email.

 

_______________________________________________
resiprocate-devel mailing list

Attachment: smime.p7s
Description: S/MIME cryptographic signature