RE: [reSIProcate] INVITE and re-INVITE without SDP, how can I share the improves ?
Great!
I think a discussion of your new Invite session state transitions would be a
good place to start. Posting a modified dum\doc\dum-invite-connected-state.dot
and dum-clientinvite-state.dot file would probably be the best way. Also a
brief description of the modified/added interfaces would be good.
Thanks,
Scott
-----Original Message-----
From: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Rodrigo
Alcoberro
Sent: Wednesday, September 07, 2005 11:41 AM
To: resiprocate-devel@xxxxxxxxxxxxxxxxxxx
Subject: [reSIProcate] INVITE and re-INVITE without SDP,how can I share the
improves ?
Hello,
I have done some improves to DUM to allow the INVITE and re-INVITE without SDP
transmission.
How can I share them with you ?
Best regards
Rodrigo
> -----Original Message-----
> From: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [SMTP:resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Rodrigo
> Alcoberro
> Sent: Wednesday, August 31, 2005 16:46
> To: resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [reSIProcate] Re-INVITE without SDP
>
> Thank you for the prompt answer Scott,
> I´m trying to add this capability because is very usefull for us. The
> re-INVITE message goes without SDP now but I think the state machine keep in
> a "offering" (wrong) state. I´m viewing it in detail just now.
> Please let me know if you have any comments or suggestions.
>
> Also, I have seen that the resiprocate release (0.9.0-5019) had a problem
> with the initial INVITE without SDP, I fixed it doing in
> ClientInviteSession.cxx, Line 32 (inside ClientInviteSession constructor)
>
> if(initialOffer)
> mProposedLocalSdp = InviteSession::makeSdp(*initialOffer)
>
>
> Then, If const SdpContents * initialOffer == 0 don´t construct the SDP.
> I´m have been using it for a month.
>
>
> Thank you very much
> Rodrigo
>
>
>
>
> > -----Original Message-----
> > From: Scott Godin [SMTP:slgodin@xxxxxxxxxxxx]
> > Sent: Wednesday, August 31, 2005 12:50
> > To: Rodrigo Alcoberro; resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> > Subject: RE: [reSIProcate] Re-INVITE without SDP
> >
> > Great question! Currently this is not possible if you are using the DUM
> > layer. All re-invites will carry an SDP.
> >
> > This does seem like a good interface to add though. :)
> >
> > Note: The current DUM is even broken on receiving a re-invites with no
> > offer. However a fix for this problem is currently being worked on.
> >
> > Scott
> >
> > -----Original Message-----
> > From: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Rodrigo
> > Alcoberro
> > Sent: Wednesday, August 31, 2005 11:10 AM
> > To: resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> > Subject: [reSIProcate] Re-INVITE without SDP
> >
> > Hello,
> > I´m working in a system that requires a B2BUA re-inviting without SDP to
> > the caller party forcing it to send a SDP offer in the 200 OK message. Is
> > it possible to do that with DUM or resiprocate ?
> >
> > Thank you and best regards
> >
> >
> >
> > Rodrigo Alcoberro
> > Ingeniero de Desarrollo
> > Project Leader
> >
> > ATS Advanced Technology Solutions
> > Av. Corrientes 880 Piso 11
> > C1043AAV - Buenos Aires - Argentina
> > Tel: +54-11-6393-4345 / Fax: +54-11-6393-4300 ext. 485
> > Web: www.ats-connection.com
> >
> > _______________________________________________
> > resiprocate-devel mailing list
> > resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> > https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel
> _______________________________________________
> resiprocate-devel mailing list
> resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel
_______________________________________________
resiprocate-devel mailing list
resiprocate-devel@xxxxxxxxxxxxxxxxxxx
https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel