[reSIProcate] Dum registration support for mulitple registrationsof different usernames

[Scott Godin]

Well the first two parameters on makeInitialRequest are used for
Request-Uri and From field respectively.  For a registration request you
would need to make these different only if you wanted to indicate that
you are registering on someone else's behalf.  We should probably be
allowing this in the API.

The user used in the Contact header is taken from the 2nd argument to
makeInitialRequest - the host and port are then populated by the stack,
or taken from the profile setting OverrideHostAndPort.

You can have an entirely different Contact by specifying a Gruu in the
UserProfile.  Have a look at the code in
BaseCreator::makeInitialRequest.

Scott

> -----Original Message-----
> From: Shaun Dawson [mailto:scdawson at gmail.com]
> Sent: Friday, May 26, 2006 5:25 PM
> To: Scott Godin
> Subject: Re: [reSIProcate] Dum registration support for mulitple
> registrationsof different usernames
> 
> I see.  But I can't register an AOR with a username that differs from
> my own.  So, if I want to register sip:dawson at resiprocate.com to the
> contact sip:scd111 at 10.10.10.10, I can't do that with the Dum unless I
> fix that line, right?
> 
> Shaun
> 
> On 5/26/06, Scott Godin <slgodin at icescape.com> wrote:
> > You can use multiple registration requests to register multiple
users.
> > You may need a separate UserProfile for each user - if
authentication is
> > required.
> >
> > > -----Original Message-----
> > > From: resiprocate-devel-bounces at list.sipfoundry.org
> > [mailto:resiprocate-
> > > devel-bounces at list.sipfoundry.org] On Behalf Of Shaun Dawson
> > > Sent: Friday, May 26, 2006 2:01 PM
> > > To: resiprocate-devel at list.sipfoundry.org
> > > Subject: [reSIProcate] Dum registration support for mulitple
> > > registrationsof different usernames
> > >
> > > All,
> > >
> > > I believe that it is currently impossible to use DUM to register
more
> > > than one username with a registrar.  This is because of line 17 in
> > > RegistrationCreator.cxx, which uses the target for both the aor
and
> > > contact usernames:
> > >
> > >    makeInitialRequest(target, target, REGISTER);
> > >
> > > I can correct this by changing this line to read:
> > >
> > >    makeInitialRequest(target, userProfile->getDefaultFrom(),
> > REGISTER);
> > >
> > > which uses the DefaultFrom in the user profile instead of the
target.
> > >
> > > Two questions:
> > >
> > > First, Is this the right way to do this?  It seems like it to me,
but
> > > I can't believe that I'm the first person to have encountered this
> > > issue in the Dum.
> > >
> > > Second, if this is the right way to do this, does anyone mind if I
go
> > > ahead and make this change?  I believe that this will break any
> > > existing implementations that do not properly set up a user
profile,
> > > so I'm a little bit afraid of doing that.
> > >
> > > thanks,
> > >   Shaun
> > > _______________________________________________
> > > resiprocate-devel mailing list
> > > resiprocate-devel at list.sipfoundry.org
> > > https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel
> >