[reSIProcate] Sending 100 trying
Michael Baj
mbaj at bridgeport-networks.com
Mon May 15 15:28:58 CDT 2006
Jason,
I have uncommented the stack debug statements that were originally in
the code under ProcessServerInvite(). My UAS is set up not to send any
response until 200 ms after receiving the INVITE. Below is the debug
output of my call flow. As you can see, the 100 trying timer is
triggered, but is not being processed because the transaction state is
not in the "Trying" state. When the TransactionState gets created (line
261, TransactionState.cxx), it is created with the state of Trying.
However, 5 lines, lower, the state is changed to "Proceeding". It my
guess that this is not allowing the timer to be processed. What are
your thoughts?
Thanks,
Mike
STACK | 20060515-161746.631 | mbaj-dev | sipdirector | RESIP:TRANSACTION
| 21696 | 29723568 | TransactionState.cxx:183 | Found matching
transaction for Timer: Timer Trying 80 ->
tid=-1-4invite1-21716 at 192.168.10.55invite1 [ ServerInvite/Proceeding
unreliable target=[ V4 192.168.10.55:5062 UDP target domain=unspecified
received on: Transport: [ V4 0.0.0.0:5060 UDP target domain=unspecified
connectionId=0 ] connectionId=0 ]]
STACK | 20060515-161746.632 | mbaj-dev | sipdirector | RESIP:TRANSACTION
| 21696 | 29723568 | TransactionState.cxx:920 |
TransactionState::processServerInvite: Timer: Timer Trying 80
STACK | 20060515-161746.632 | mbaj-dev | sipdirector | RESIP:TRANSACTION
| 21696 | 29723568 | TransactionState.cxx:1145 | TimerTrying fired. Not
in Trying state. Ignoring
DEBUG | 20060515-161746.791 | mbaj-dev | sipdirector | RESIP:TRANSPORT |
21696 | 29723568 | Transport.cxx:259 | incoming from: [ V4
192.168.10.55:5070 UDP target domain=unspecified received on: Transport:
[ V4 0.0.0.0:5060 UDP target domain=unspecified connectionId=0 ]
connectionId=0 ]
-----Original Message-----
From: jason.fischl at gmail.com [mailto:jason.fischl at gmail.com] On Behalf
Of Jason Fischl
Sent: Monday, May 15, 2006 4:05 PM
To: Michael Baj
Cc: resiprocate-devel at list.sipfoundry.org
Subject: Re: [reSIProcate] Sending 100 trying
The underlying stack sends the 100 after 80ms if no other response is
sent by the UAS.
On 5/15/06, Michael Baj <mbaj at bridgeport-networks.com> wrote:
>
>
>
>
> I'm still stuck on this 100 Trying problem that I'm having. I have
noticed
> that in my code, I am receiving 100 Trying, but only in the case of
when I
> receive a retransmission of an INVITE. I've been pouring over the
> reciprocate code, and it seems that this is behaving as designed.
However,
> I still do not receive any 100 Trying after the initial INVITE is
received.
> I am using sipp to generate and terminate requests for my test, and I
have
> inserted a delay of 200 ms after sending the 100 trying, and am still
not
> receiving a 100 Trying.
>
>
>
> This is the DEBUG trace from when I receive the invite, up until I
receive
> the 100 Trying from my terminating device. As you can see, there is
no 100
> Trying being generated by the stack. Is there something that I need
to
> register for in the TransactionUser to enable this behavior?
>
>
>
>
> Thanks in advance!
>
> Michael Baj
>
>
>
>
> DEBUG | 20060515-144250.322 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | UdpTransport.cxx:57 | Sending message on udp.
>
> DEBUG | 20060515-144250.323 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | Transport.cxx:259 | incoming from: [ V4
192.168.10.55:5062
> UDP target domain=unspecified received on: Transport: [ V4
0.0.0.0:5060 UDP
> target domain=unspecified connectionId=0 ] connectionId=0 ]
>
> DEBUG | 20060515-144250.323 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TransactionUser.cxx:66 | Checking if SipReq: INVITE
> 1111400000 at 192.168.10.55:5060
> tid=-1-4invite1-3576 at 192.168.10.55invite1 cseq=INVITE
> contact=3128652501 at 192.168.10.55:5062 / 1 from(wire) is for me
>
> DEBUG | 20060515-144250.324 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TransactionUser.cxx:71 | Checking rule...
>
> DEBUG | 20060515-144250.324 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | MessageFilterRule.cxx:42 | Matching rule for INVITE
> sip:1111400000 at 192.168.10.55:5060 SIP/2.0
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5062;branch=z9hG4bK-1-4invite1-3576 at 192.168.10.55invite1;r
port=5062
>
> Max-Forwards: 70
>
> Contact: <sip:3128652501 at 192.168.10.55:5062>
>
> To: <sip:1111400000 at 192.168.10.55:5060>
>
> From:
>
"3128652501"<sip:3128652501 at 192.168.10.55:5062>;tag=123abc1from1-3576 at 19
2.168.10.55
>
> Call-ID: 1-3576 at 192.168.10.55
>
> CSeq: 1 INVITE
>
> Subject: Performance Test
>
> Content-Type: application/sdp
>
> Content-Length: 138
>
>
>
> v=0
>
> o=user1 53655765 2353687637 IN IP4 192.168.10.55
>
> s=-
>
> c=IN IP4 192.168.10.55
>
> t=0 0
>
> m=audio 10008 RTP/AVP 0
>
> a=rtpmap:0 PCMU/8000
>
>
>
> DEBUG | 20060515-144250.325 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TransactionUser.cxx:74 | Match!
>
> DEBUG | 20060515-144250.325 | mbaj-dev | sipdirector | RESIP | 3556 |
> 29871024 | Helper.cxx:302 | Helper::makeResponse(SipReq: INVITE
> 1111400000 at 192.168.10.55:5060
> tid=-1-4invite1-3576 at 192.168.10.55invite1 cseq=INVITE
> contact=3128652501 at 192.168.10.55:5062 / 1 from(wire) code=100 reason=
>
> DEBUG | 20060515-144250.326 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TimerQueue.cxx:85 | Adding timer: Timer Trying
> tid=-1-4invite1-3576 at 192.168.10.55invite1 ms=80
>
> DEBUG | 20060515-144250.326 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TransactionState.cxx:1623 | Send to TU: TU:
SipDirector
> size=0 INVITE sip:1111400000 at 192.168.10.55:5060 SIP/2.0
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5062;branch=z9hG4bK-1-4invite1-3576 at 192.168.10.55invite1;r
port=5062
>
> Max-Forwards: 70
>
> Contact: <sip:3128652501 at 192.168.10.55:5062>
>
> To: <sip:1111400000 at 192.168.10.55:5060>
>
> From:
>
"3128652501"<sip:3128652501 at 192.168.10.55:5062>;tag=123abc1from1-3576 at 19
2.168.10.55
>
> Call-ID: 1-3576 at 192.168.10.55
>
> CSeq: 1 INVITE
>
> Subject: Performance Test
>
> Content-Type: application/sdp
>
> Content-Length: 138
>
>
>
> v=0
>
> o=user1 53655765 2353687637 IN IP4 192.168.10.55
>
> s=-
>
> c=IN IP4 192.168.10.55
>
> t=0 0
>
> m=audio 10008 RTP/AVP 0
>
> a=rtpmap:0 PCMU/8000
>
>
>
> DEBUG: Got: SipReq: INVITE 1111400000 at 192.168.10.55:5060
> tid=-1-4invite1-3576 at 192.168.10.55invite1 cseq=INVITE
> contact=3128652501 at 192.168.10.55:5062 / 1 from(wire)
>
> DEBUG: Trying to match 3128652501 as Forced Route
>
> DEBUG: getAssignedCsg: User 3128652501 not assigned to CSG
>
> DEBUG: Sending INVITE to sip:192.168.10.55:5070
>
> DEBUG: Sending SipReq: INVITE 1111400000 at 192.168.10.55:5070
> tid=f0a0343925a30f66 cseq=INVITE contact=3128652501 at 192.168.10.55:5062
/ 1
> from(wire)
>
> DEBUG | 20060515-144250.355 | mbaj-dev | sipdirector | RESIP | 3556 |
> 40360880 | SipStack.cxx:276 | SEND: SipReq: INVITE
> 1111400000 at 192.168.10.55:5070 tid=f0a0343925a30f66 cseq=INVITE
> contact=3128652501 at 192.168.10.55:5062 / 1 from(wire)
>
> DEBUG | 20060515-144250.381 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TimerQueue.cxx:85 | Adding timer: Timer B
> tid=f0a0343925a30f66 ms=32000
>
> DEBUG | 20060515-144250.381 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | TransportSelector.cxx:247 | Looking up dns entries
for
> sip:1111400000 at 192.168.10.55:5070
>
> DEBUG | 20060515-144250.381 | mbaj-dev | sipdirector | RESIP:DNS |
3556 |
> 29871024 | DnsResult.cxx:184 | DnsResult::lookup
> sip:1111400000 at 192.168.10.55:5070
>
> DEBUG | 20060515-144250.382 | mbaj-dev | sipdirector | RESIP:DNS |
3556 |
> 29871024 | DnsResult.cxx:318 | Numeric result so return immediately: [
V4
> 192.168.10.55:5070 UDP target domain=192.168.10.55 connectionId=0 ]
>
> DEBUG | 20060515-144250.382 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TimerQueue.cxx:85 | Adding timer: Timer A
> tid=f0a0343925a30f66 ms=500
>
> DEBUG | 20060515-144250.382 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | TransportSelector.cxx:483 | Looked up source for
> destination: [ V4 192.168.10.55:5070 UDP target domain=192.168.10.55
> connectionId=0 ] -> [ V4 192.168.10.55:5060 UDP target
domain=192.168.10.55
> connectionId=0 ] sent-by= sent-port=5060
>
> DEBUG | 20060515-144250.383 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | TransportSelector.cxx:752 | findTransport([ V4
> 192.168.10.55:5060 UDP target domain=192.168.10.55 connectionId=0 ])
>
> DEBUG | 20060515-144250.383 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | TransportSelector.cxx:771 | findTransport (any
interface)
> => Transport: [ V4 0.0.0.0:5060 UDP target domain=unspecified
connectionId=0
> ]
>
> DEBUG | 20060515-144250.384 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | TransportSelector.cxx:670 | Transmitting to [ V4
> 192.168.10.55:5070 UDP target domain=192.168.10.55 received on:
Transport: [
> V4 0.0.0.0:5060 UDP target domain=unspecified connectionId=0 ]
> connectionId=0 ] tlsDomain= via [ V4 192.168.10.55:5060 UDP target
> domain=192.168.10.55 connectionId=0 ]INVITE
> sip:1111400000 at 192.168.10.55:5070 SIP/2.0
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5060;branch=z9hG4bK-d87543-f0a0343925a30f66-1--d87543-;rpo
rt
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5062;branch=z9hG4bK-1-4invite1-3576 at 192.168.10.55invite1;r
port=5062
>
> Max-Forwards: 70
>
> Contact: <sip:3128652501 at 192.168.10.55:5062>
>
> To: <sip:1111400000 at 192.168.10.55:5060>
>
> From:
>
"3128652501"<sip:3128652501 at 192.168.10.55:5062>;tag=123abc1from1-3576 at 19
2.168.10.55
>
> Call-ID: 1-3576 at 192.168.10.55
>
> CSeq: 1 INVITE
>
> Subject: Performance Test
>
> Content-Type: application/sdp
>
> Content-Length: 138
>
>
>
> v=0
>
> o=user1 53655765 2353687637 IN IP4 192.168.10.55
>
> s=-
>
> c=IN IP4 192.168.10.55
>
> t=0 0
>
> m=audio 10008 RTP/AVP 0
>
> a=rtpmap:0 PCMU/8000
>
>
>
> DEBUG | 20060515-144250.386 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | Transport.cxx:210 | Adding message to tx buffer to:
[ V4
> 192.168.10.55:5070 UDP target domain=192.168.10.55 received on:
Transport: [
> V4 0.0.0.0:5060 UDP target domain=unspecified connectionId=0 ]
> connectionId=0 ]
>
> DEBUG | 20060515-144250.386 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | UdpTransport.cxx:56 | Sent: INVITE
> sip:1111400000 at 192.168.10.55:5070 SIP/2.0
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5060;branch=z9hG4bK-d87543-f0a0343925a30f66-1--d87543-;rpo
rt
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5062;branch=z9hG4bK-1-4invite1-3576 at 192.168.10.55invite1;r
port=5062
>
> Max-Forwards: 70
>
> Contact: <sip:3128652501 at 192.168.10.55:5062>
>
> To: <sip:1111400000 at 192.168.10.55:5060>
>
> From:
>
"3128652501"<sip:3128652501 at 192.168.10.55:5062>;tag=123abc1from1-3576 at 19
2.168.10.55
>
> Call-ID: 1-3576 at 192.168.10.55
>
> CSeq: 1 INVITE
>
> Subject: Performance Test
>
> Content-Type: application/sdp
>
> Content-Length: 138
>
>
>
> v=0
>
> o=user1 53655765 2353687637 IN IP4 192.168.10.55
>
> s=-
>
> c=IN IP4 192.168.10.55
>
> t=0 0
>
> m=audio 10008 RTP/AVP 0
>
> a=rtpmap:0 PCMU/8000
>
>
>
> DEBUG | 20060515-144250.388 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | UdpTransport.cxx:57 | Sending message on udp.
>
> DEBUG | 20060515-144250.601 | mbaj-dev | sipdirector | RESIP:TRANSPORT
|
> 3556 | 29871024 | Transport.cxx:259 | incoming from: [ V4
192.168.10.55:5070
> UDP target domain=unspecified received on: Transport: [ V4
0.0.0.0:5060 UDP
> target domain=unspecified connectionId=0 ] connectionId=0 ]
>
> DEBUG | 20060515-144250.618 | mbaj-dev | sipdirector | RESIP:DNS |
3556 |
> 29871024 | DnsResult.cxx:175 | Whitelisting 192.168.10.55(1):
192.168.10.55
>
> DEBUG | 20060515-144250.618 | mbaj-dev | sipdirector | RESIP:DNS |
3556 |
> 29871024 | dns/RRVip.cxx:129 | updating an existing vip: 192.168.10.55
with
> 192.168.10.55
>
> DEBUG | 20060515-144250.619 | mbaj-dev | sipdirector |
RESIP:TRANSACTION |
> 3556 | 29871024 | TransactionState.cxx:1623 | Send to TU: TU:
SipDirector
> size=0 SIP/2.0 100 Trying
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5060;branch=z9hG4bK-d87543-f0a0343925a30f66-1--d87543-;rpo
rt
>
> Via: SIP/2.0/UDP
>
192.168.10.55:5062;branch=z9hG4bK-1-4invite1-3576 at 192.168.10.55invite1;r
port=5062
>
> Contact: <sip:192.168.10.55:5070;transport=UDP>
>
> To: <sip:1111400000 at 192.168.10.55:5060>;tag=23-1-3576 at 192.168.10.55
>
> From:
>
"3128652501"<sip:3128652501 at 192.168.10.55:5062>;tag=123abc1from1-3576 at 19
2.168.10.55
>
> Call-ID: 1-3576 at 192.168.10.55
>
> CSeq: 1 INVITE
>
> Content-Length: 0
>
>
>
>
> ________________________________
>
>
> From: Scott Godin [mailto:slgodin at icescape.com]
> Sent: Thursday, May 11, 2006 3:15 PM
> To: Michael Baj; resiprocate-devel at list.sipfoundry.org
> Subject: RE: [reSIProcate] Sending 100 trying
>
>
>
> The stack automatically sends 100's if the application does not send
> anything after 80ms. So if you are not seeing a 100 it is likely
because
> there is another message sent within 80ms.
>
>
>
>
> ________________________________
>
>
> From: resiprocate-devel-bounces at list.sipfoundry.org
> [mailto:resiprocate-devel-bounces at list.sipfoundry.org] On
> Behalf Of Michael Baj
> Sent: Thursday, May 11, 2006 2:53 PM
> To: resiprocate-devel at list.sipfoundry.org
> Subject: [reSIProcate] Sending 100 trying
>
>
>
> Greetings,
>
>
>
> I'm trying to get my forwarding proxy to send a 100 trying message on
a new
> INVITE. Is there a way to configure the stack to send 100 trying on
new
> INVITES? (I am not using DUM). I noticed however, that my proxy will
send
> 100 trying on re-INVITEs. I've looked through the repro code and I
was
> unable to locate where and if a 100 trying was being generated. I
noticed
> that they trap 100 tryings from being forwarded, which is what I do as
well.
>
>
>
> What is the best way to accomplish what I am trying to achieve?
>
>
>
> Thanks in advance!
>
> Michael Baj
>
> _______________________________________________
> resiprocate-devel mailing list
> resiprocate-devel at list.sipfoundry.org
> https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel
>
>
More information about the resiprocate-devel
mailing list