reSIProcate

Mailing Lists

Source Code

Google Search:



< Previous by Date Date Index Next by Date >
< Previous in Thread Thread Index Next in Thread >

Re: [reSIProcate-users] reTurn TestAsyncClient TLS mode fail


They *should* be interoperable.

Scott

Sent from my iPhone

On May 2, 2016, at 6:40 PM, Tom Chen <chentom60@xxxxxxxxxxx> wrote:

Scott, 

Thank you for your help! 
I'm wondering why these two TURN servers behave differently? is there any specification to follow?

Tom



Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Scott Godin <sgodin@xxxxxxxxxxxxxxx>
Date: 5/2/16 7:59 AM (GMT-08:00)
To: Tom Chen <chentom60@xxxxxxxxxxx>
Subject: Re: reTurn TestAsyncClient TLS mode fail

Hi Tom,

Last time I checked TLS works fine in reTurn server and client APIs.  Your wireshark trace shows a SSL/TLS Hello being sent to your server, then there is no response from the server.  We do not support the turnserver (http://turnserver.sourceforge.net/) project here.  You could try using the reTurn TURN server instead. 

Scott



On Fri, Apr 29, 2016 at 10:21 PM, Tom Chen <chentom60@xxxxxxxxxxx> wrote:

Hello,

 

I have successfully tested TURN client reTurn/client/test/TestAsyncClient.cxx in UDP mode, however, somehow, the TLS mode always fails. From the shell screen of turnserver, I can see that the TCP/TLS connection has been established successfully, so the cert file (the ca.perm in the same directory) seems to be confirmed ok:

 

0: IPv4. TCP listener opened on : 10.113.54.60:3478

0: IPv4. TCP listener opened on : 10.113.54.60:3479

18: IPv4. tcp or tls connected to: 10.113.54.61:51575

 

But then nothing happens, the onConnectSuccess or Failure events of the TestAsyncClient.cxx are not observed. I am wondering why? I am not sure if my TURN server was started correctly? Or TestAsyncClient.cxx needs some extra work? Can someone help me to figure out?

 

My setup is like this:

TestAsyncClient is running at 10.113.54.61

turnserver at 10.113.54.60

UDP echo server at 10.113.54.57 (should I use a TCP echo server as test peer instead?)

 

Turn Server Start script:

turnserver -v --log-file /tmp/turn.log -f --min-port=32355 --max-port=65535 --no-stun=1 -r ip:port -c /etc/turnserver/turnserver.conf --cert /home/tom/workspace/resiprocate-1.9.10/reTurn/client/test/ca.pem

 

Turn Client Start script:

#TestAsyncClient 10.113.54.60 3479 10.113.54.61

INFO | 20000705-060733.809 |  | RESIP:DNS | 1075036160 | DnsUtil.cxx:233 | Local IP address for  is 169.254.6.91

INFO | 20000705-060733.813 |  | RESIP:TEST | 1075036160 | TestAsyncClient.cxx:279 | Using 10.113.54.61 as local IP address.

 

Attached is the trace captured on the TURN server, TCP packet #546 ~ 552 are for communication establishment between TURN server (10.113.54.60) and client (10.113.54.61). I used “ip.addr==10.113.54.61” as packet filter for Wireshark.

 

Tom




Statement Of Confidentiality:

This electronic message transmission, and all attachments, contains information from Extron Electronics which is confidential and privileged. The information is for the exclusive viewing or use of the intended recipient. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.