All,
I think I finally figured out my last issue. The problem was that the
resiprocate Make file was specifying 'linux-generic32' instead of
'linux-generic64' when calling the ./Configure script for openssl. In my case,
since I'm compiling under a 64-bit Linux, I obviously want to use the 64-bit
version of openssl.
Once I validate my build steps one last time, I'll send them out to the list
for anyone who cares to see.
Thanks again,
Eric
----- Original Message -----
From: "Eric Cozzi"<ericc@xxxxxxxxxx>
To: "Scott Godin"<sgodin@xxxxxxxxxxxxxxx>
Cc: resiprocate-users@xxxxxxxxxxxxxxx
Sent: Friday, August 27, 2010 2:08:02 PM
Subject: Re: [reSIProcate-users] Problem compiling recon under Centos 5.5 64-bit
With Scott's generous help, I was finally able to get a clean compile. However,
when I go to run testUA under CentOS 5.5 64-bit, it becomes unresponsive. After
some digging, I've identified that its hanging when calling RSA_generate_key
from FlowManager::CreateCert. I also noticed that I'm getting a sipXtapilog.txt
file in the same directory as my application with a few errors in it (I get
additional errors in this file if I don't run the application as root). Not
sure if that's related to the RSA issue -- I wouldn't think so, but I've been
proven wrong before.
I wonder if anyone has encountered anything like this before.
Eric
----- Original Message -----
From: "Eric Cozzi"<ericc@xxxxxxxxxx>
To: "Scott Godin"<sgodin@xxxxxxxxxxxxxxx>
Cc: resiprocate-users@xxxxxxxxxxxxxxx
Sent: Tuesday, August 24, 2010 10:22:52 AM
Subject: Re: [reSIProcate-users] Problem compiling recon under Centos 5.5 64-bit
Scott,
Thank you for your response. The ~/resip/contrib/openssl/openssl/ssl.h file is the
correct version and does contain the definition that you indicate below. However, I'm
also separately installing the openssl-devel.x86_64 package. Might the compiler be
finding these header files instead of the patched versions? I tried removing the
openssl-devel.x86_64 package, building the patched SSL, and then rebuilding sipXtapi, et
al. Unfortunately, I'm getting the following error. Seems like the instructions for
building recon are missing a few "steps." Any suggestions you can offer as to
how to get a clean compile would be greatly appreciated.
cd ~/resip/contrib/openssl
./Configure linux-generic64 --openssldir=/usr enable-tlsext
make depend
make
/usr/bin/ld: /usr/lib/libssl.a(s23_meth.o): relocation R_X86_64_32
against
`a local symbol' can not be used when making a shared object;
recompile with -fPIC
Thanks,
Eric
----- Original Message -----
From: "Scott Godin"<sgodin@xxxxxxxxxxxxxxx>
To: "Eric Cozzi"<ericc@xxxxxxxxxx>
Cc: resiprocate-users@xxxxxxxxxxxxxxx
Sent: Monday, August 23, 2010 2:56:45 PM
Subject: Re: [reSIProcate-users] Problem compiling recon under Centos 5.5 64-bit
Hi Eric,
A quick look at this, seems to indicate that the build is not
referencing the patched openssl build for DTLS/SRTP support. The
~/resip/contrib/openssl/openssl/ssl.h file should include the
following definition:
#ifndef OPENSSL_NO_SRTP
typedef struct srtp_protection_profile_st
{
const char *name;
unsigned long id;
int master_key_bits;
int salt_bits;
} SRTP_PROTECTION_PROFILE;
DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE);
#endif
If you are cross compiling you will need to build the openssl project
separately. See the instruction here:
http://www.resiprocate.org/Building_recon#Building_recon_on_Generic_Linux
Regards,
Scott
On Wed, Aug 18, 2010 at 4:25 PM, Eric Cozzi<ericc@xxxxxxxxxx> wrote:
All,
I've been trying to get recon compiled under Centos 5.5 64-bit for the last
several days. I've worked through many of the issues that I've hit, but I keep
hitting new issues. Currently I'm receiving the following errors:
g++ -march=x86-64 -D_REENTRANT -Wall -I../build/../reTurn
-I../build/../contrib/asio -I../build/.. -I../build/../contrib/ares
-I~/resip/contrib/openssl/include -I../build/../contrib/srtp/include
-I../build/../contrib/srtp/crypto/include/ -I/usr/include -DUSE_SSL
-DBOOST_ALL_NO_LIB -DOS_MAJOR_VER=2 -DOS_MINOR_VER=6 -DOS_POINT_VER=18-194
-DOS_PATCH_VER=11 -DRESIP_OSTYPE_LINUX -DRESIP_ARCH_X86_64 -DRESIP_LARCH_X86_64
-DRESIP_TOOLCHAIN_GNU -DUSE_ARES -c -o obj.nodebug.Linux.x86_64/Flow.o Flow.cxx
dtls_wrapper/DtlsSocket.hxx:93: error: ISO C++ forbids declaration of
‘SRTP_PROTECTION_PROFILE’ with no type
dtls_wrapper/DtlsSocket.hxx:93: error: expected ‘;’ before ‘*’ token
../build/../rutil/Data.hxx:751: warning: ‘resip::invokeDataInit’ defined but
not used
make[1]: *** [obj.nodebug.Linux.x86_64/Flow.o] Error 1
make[1]: Leaving directory `/home/ericc/resip/reflow'
make: *** [reflow] Error 2
Below are the steps I'm using to setup my system and compile. Any help figuring
this out would be appreciated.
1. Open terminal to user's home directory (eg, /home/ericc)
2. svn checkout https://svn.resiprocate.org/rep/resiprocate/main resip
3. svn checkout https://scm.sipfoundry.org/rep/sipX/main sipXtapi
4. cd resip/contrib
5. svn checkout
https://svn.resiprocate.org/rep/resiprocate/contrib/dtls-srtp/openssl openssl
6. as root, yum -y install boost.x86_64 boost-devel.x86_64
7. as root, download and install
http://packages.sw.be/cppunit/cppunit-1.12.0-3.el5.rf.x86_64.rpm
wget http://packages.sw.be/cppunit/cppunit-1.12.0-3.el5.rf.x86_64.rpm
rpm -i cppunit-1.12.0-3.el5.rf.x86_64.rpm
8. as root, download and install
http://packages.sw.be/cppunit/cppunit-devel-1.12.0-3.el5.rf.x86_64.rpm
wget
http://packages.sw.be/cppunit/cppunit-devel-1.12.0-3.el5.rf.x86_64.rpm
rpm -i cppunit-devel-1.12.0-3.el5.rf.x86_64.rpm
9. as root, yum -y install pcre-devel.x86_64
11. as root, yum -y install openssl-devel.x86_64
12. as root, download, compile and install
http://ftp.gnu.org/gnu/autoconf/autoconf-2.63.tar.gz
wget http://ftp.gnu.org/gnu/autoconf/autoconf-2.63.tar.gz
tar xvzf autoconf-2.63.tar.gz
cd autoconf-2.63
./configure --prefix=/usr
make
make install
cd ..
13. mkdir /tmp/stage
14. Go to sipXtapi root
15. To build sipXportLib:
cd sipXportLib
autoreconf -fi
./configure --prefix=/tmp/stage --with-pcre_libdir=/usr/lib64/
make& make install
cd ..
16. To build sipXsdpLib:
cd sipXsdpLib
autoreconf -fi
./configure --prefix=/tmp/stage --with-pcre_libdir=/usr/lib64/
make& make install
cd ..
17. Modify mp/MpodOss.cpp
cd sipXmediaLib/src/mp
edit MpodOss.cpp and add '#include "os/OsCallback.h"' below '#include
"os/OsNotification.h"'
cd ../..
18. To build sipXmediaLib:
autoreconf -fi
./configure --prefix=/tmp/stage --enable-local-audio
--disable-stream-player --with-pcre_libdir=/usr/lib64/
make& make install
19. To build sipXmediaAdapterLib:
cd sipXmediaAdapterLib
autoreconf -fi
./configure --prefix=/tmp/stage --enable-topology-graph
--disable-stream-player --with-pcre_libdir=/usr/lib64/
make& make install
20. Go to resip/
21. run ./configure
[ericc@localhost resip]$ ./configure
What compile profile will you use?
(debug, nodebug, opt, gopt, prof, small) [debug] nodebug
Build the Repro proxy server?
(yes, no) [yes] no
Build the reCon Conversation Manager? (requires dtls-srtp patched
OpenSSL)
(yes, no) [no] yes
Do you want to include SIP over DTLS support? (Requires OpenSSL 0.9.8+)
(yes, no) [no] yes
Where is OpenSSL? (leave blank to use installed copy)
[] ~/resip/contrib/openssl
Where is popt.h?
[/usr/local/include] /usr/include
Where is libpopt?
[/usr/local/lib] /usr/lib
Writing Makefile.conf...
22. make
Thanks,
Eric
_______________________________________________
resiprocate-users mailing list
resiprocate-users@xxxxxxxxxxxxxxx
List Archive: http://list.resiprocate.org/archive/resiprocate-users/
_______________________________________________
resiprocate-users mailing list
resiprocate-users@xxxxxxxxxxxxxxx
List Archive: http://list.resiprocate.org/archive/resiprocate-users/
_______________________________________________
resiprocate-users mailing list
resiprocate-users@xxxxxxxxxxxxxxx
List Archive: http://list.resiprocate.org/archive/resiprocate-users/
_______________________________________________
resiprocate-users mailing list
resiprocate-users@xxxxxxxxxxxxxxx
List Archive: http://list.resiprocate.org/archive/resiprocate-users/