Re: [reSIProcate] Configuring reConServer to run in Debian Jessie

[Balram Pariyarath <balbbrl@xxxxxxxxx>]

$ ./configure CPPFLAGS="-I/usr/include/sipxtapi -DDEFAULT_BRIDGE_MAX_IN_OUTPUTS=10 -D__pingtel_on_posix__ -D_linux -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DRESIP_TOOLCHAIN_GNU -DRESIP_OSTYPE_LINUX -DRESIP_ARCH_X86_64 -DHAVE_sockaddr_in_len -DUSE_CARES -DUSE_SSL -DUSE_IPV6 -DHAVE_EPOLL"

this one right? I ran this before running make.

On Fri, Jun 17, 2016 at 12:09 AM, Balram Pariyarath <balbbrl@xxxxxxxxx> wrote:

Thanks Keerthana! I remember to have followed similar steps and got it running for sometime. Dont know where I messed up!

On Thu, Jun 16, 2016 at 11:39 PM, Keerthana Krishnan <contactkeerthana@xxxxxxxxx> wrote:

Hi Balram,

Although not for reconserver, I had almost a similiar problem installing telepathy in my system. (A lot of the same terms in my error as well). I was later able to install that package with a little help from apt-get. Have you tried this?

As for the my problem, this is all the steps I took.

You will have to change the package name and probably only the first part of telepathy-qt installation is a relevant source.

Hope this helps

Regards,

Keerthana

On 16 June 2016 at 23:31, Balram Pariyarath <balbbrl@xxxxxxxxx> wrote:

$ apt-cache showsrc reconserver yields:

Package: reconserver

Binary: reconserver

Version: 0.10.3-1

Maintainer: Debian VoIP Team <pkg-voip-maintainers@xxxxxxxxxxxxxxxxxxxxxxx>

Uploaders: Daniel Pocock <daniel@xxxxxxxxxx>

Build-Depends: debhelper (>= 9.0.0), autotools-dev, dpkg-dev (>= 1.16.1~), librecon-1.9-dev (>= 1.9.6), libsipxtapi-dev (>= 3.3.0~test17)

Architecture: any

Standards-Version: 3.9.5

Format: 3.0 (quilt)

Files:

 3bc2fdd38505e09eef78f5a8da8cf0ed 2051 reconserver_0.10.3-1.dsc

 e7705389e6b8927fa3cba1c6e1675eea 238553 reconserver_0.10.3.orig.tar.gz

 34ca0dff172bea8e5e1e52e641c9320f 5154 reconserver_0.10.3-1.debian.tar.gz

Vcs-Browser: http://git.debian.org/?p=pkg-voip/reconserver.git;a=summary

Vcs-Git: git://git.debian.org/pkg-voip/reconserver.git

Checksums-Sha1:

 9a3501ae7139e12ea5b15ac139b7eb5b96232ee8 2051 reconserver_0.10.3-1.dsc

 334978b0907db88c351206c92e5e84d0809c8661 238553 reconserver_0.10.3.orig.tar.gz

 1d023ecf67a28ac56ad8aa60b1a480e486e10ab2 5154 reconserver_0.10.3-1.debian.tar.gz

Checksums-Sha256:

 3594cdb88e87a3ec1d60cbd981dba46fd34d54fe56085539ed4f01fa10da9cdd 2051 reconserver_0.10.3-1.dsc

 8faf1aa1d7ee5fba3983320416d23a78e54b7889041742b40635da65732de2b1 238553 reconserver_0.10.3.orig.tar.gz

 44e0c7e1f7739af4546ed0d4bb63ef07b21d0675df3fe2f2878f00a3e2ec8803 5154 reconserver_0.10.3-1.debian.tar.gz

Homepage: https://github.com/resiprocate/reConServer

Package-List: 

 reconserver deb net extra

Directory: pool/main/r/reconserver

Priority: source

Section: misc

On Thu, Jun 16, 2016 at 11:28 PM, Balram Pariyarath <balbbrl@xxxxxxxxx> wrote:

I already ran sudo apt-get build-dep reconserver and some packages were installed. Tried it again now. Nothing new!

On Thu, Jun 16, 2016 at 12:40 PM, Daniel Pocock <daniel@xxxxxxxxxx> wrote:

On 14/06/16 20:18, Balram Pariyarath wrote:
> I get the following error on make:
>
> make  all-am
> make[1]: Entering directory '/home/balram/Projects/gsoc/reConServer'
> g++  -g -O2   -o reConServer reConServer.o reConServerConfig.o
> B2BCallManager.o MyConversationManager.o MyMessageDecorator.o -lrecon
> -lreflow -lsipXsdp -lsipXmediaProcessing -lsipXmedia -lsipXport
> -lsipXtack -ldum -lresip -lrutil -lssl -lcrypto -lpthread
> reConServer.o: In function `recon::ReConServerProcess::main(int, char**)':
> /home/balram/Projects/gsoc/reConServer/reConServer.cxx:888: undefined
> reference to `resip::Log::initialize(resip::Data const&, resip::Data
> const&, resip::Data const&, char const*, resip::ExternalLogger*,
> resip::Data const&)'
> reConServer.o:(.rodata._ZTV11MyUserAgent[_ZTV11MyUserAgent]+0x70):
> undefined reference to `recon::UserAgent::post(resip::Message*)'
> reConServer.o:(.rodata._ZTV11MyUserAgent[_ZTV11MyUserAgent]+0x160):
> undefined reference to `non-virtual thunk to
> recon::UserAgent::post(resip::Message*)'
> collect2: error: ld returned 1 exit status
> Makefile:405: recipe for target 'reConServer' failed
> make[1]: *** [reConServer] Error 1
>


Please try:

$ sudo apt-get update

$ sudo apt-get build-dep reconserver

Does it install any new packages when you do that?

_______________________________________________
resiprocate-devel mailing list
resiprocate-devel@xxxxxxxxxxxxxxx
https://list.resiprocate.org/mailman/listinfo/resiprocate-devel

--

Balram P Menon
Tech Head | Excel 2016
Computer Science and Engineering (Batch: 2013-17)
Govt. Model Engineering College, Kochi-21

: 8129130866
✉: balbbrl@gmail.com

--

Balram P Menon
Tech Head | Excel 2016
Computer Science and Engineering (Batch: 2013-17)
Govt. Model Engineering College, Kochi-21

: 8129130866
✉: balbbrl@gmail.com

_______________________________________________
resiprocate-devel mailing list
resiprocate-devel@xxxxxxxxxxxxxxx
https://list.resiprocate.org/mailman/listinfo/resiprocate-devel

--

Keerthana

About : http://www.keerthanakrishnan.in/

Blog   : http://thewaterbabe.in/

--

Balram P Menon
Tech Head | Excel 2016
Computer Science and Engineering (Batch: 2013-17)
Govt. Model Engineering College, Kochi-21

: 8129130866
✉: balbbrl@gmail.com

--

Balram P Menon
Tech Head | Excel 2016
Computer Science and Engineering (Batch: 2013-17)
Govt. Model Engineering College, Kochi-21

: 8129130866
✉: balbbrl@gmail.com