< Previous by Date Date Index Next by Date >
< Previous in Thread Thread Index Next in Thread >

Re: [reSIProcate] resip error while installing boston bridge


Jason
I got the fol. error after foll. your instructions
[root@sipx resip]# ./configure

configure: error: cannot find sources (resiprocate/config.hxx.in) in . or ..

Can you spot the problem?

Linda


On 7/24/06, Jason Fischl <jason@xxxxxxxxxxxxxxx> wrote:
You can resolve this issue by doing the following:

remove HeaderHash.cxx
svn update
touch HeaderHash.cxx
rebuild


On 7/24/06, Byron Campen <bcampen@xxxxxxxxxxxx > wrote:
>
>  Is HeaderHash.cxx still empty? (it is supposed to contain some
> gperf-generated code) If it is empty, make sure you have gperf installed on
> your system.
>
> If you have gperf and an empty HeaderHash.cxx, make absolutely certain that
> you have the HeaderHash.gperf file (this is the input that gperf needs to
> generate HeaderHash.cxx).
>
> If neither of these works, I am not sure where the problem is.
>
> Best regards,
> Byron Campen
>
>
> In the list of files that you stated, only HeaderHash.cxx is the file that
> is empty. I deleted that file and  ran the make command again, but it seems
> that HeaderHash.cxx file gets created again.
>  I got the foll error:
> ../build/../resip/stack/obj.debug.Linux.i686/libresip.a(Headers.o)(.text+0x66b6):
> In function `resip::Headers::getType(char const*, int)':
> /root/src/3.2/resiprocateLib/resiprocate/resip/stack/Headers.cxx:291:
> undefined reference to `resip::HeaderHash::in_word_set(char
> const*, unsigned int)'
>  collect2: ld returned 1 exit status
>  make[1]: *** [bin.debug.Linux.i686/repro] Error 1
>  rm obj.debug.Linux.i686/repro.o obj.debug.Linux.i686/repro.d
>  make[1]: Leaving directory
> `/root/src/3.2/resiprocateLib/resiprocate/repro'
>  make: *** [repro] Error 2
>
>  Kindly let me know if you have any solutions.
>
>  Linda
>
>
> On 7/24/06, Scott Godin <slgodin@xxxxxxxxxxxx > wrote:
> >
> >
> >
> >
> >
> > Are HeaderHash.cxx ParameterHash.cxx and MethodHash.cxx empty?  If so, try
> deleting these running make again.  These files should be in
> resiprocateLib/resiprocate/resip/stack.
> >
> >
> >
> >
> >
> >
> > From: Linda Thomas [mailto:linda.sipx@xxxxxxxxx ]
> > Sent: Sunday, July 23, 2006 6:32 PM
> > To: Scott Godin
> > Cc: resiprocate-devel@xxxxxxxxxxxxxxxxxxx ;
> sipx-dev@xxxxxxxxxxxxxxxxxxx
> >
> > Subject: Re: [reSIProcate] resip error while installing boston bridge
> >
> >
> >
> >
> >
> >
> >
> > I downloaded the resiprocateLib folder from
> http://scm.sipfoundry.org/rep/sipX/main/resiprocateLib/
> >
> > I changed my directory path to reciprocateLib\main and ran ./configure
> which didnt give any error.
> > However, when I ran ./make it gave the following error:
> > Please guide me:
> >
> > : In function `resip::Headers::getType(char const*, int)':
> >
> /root/src/3.2/resiprocateLib/resiprocate/resip/stack/Headers.cxx:291:
> undefined reference to `resip::HeaderHash::in_word_set(char
> const*, unsigned int)'
> > collect2: ld returned 1 exit status
> > make[1]: *** [bin.debug.Linux.i686/repro] Error 1
> > rm obj.debug.Linux.i686/repro.o obj.debug.Linux.i686/repro.d
> > make[1]: Leaving directory
> `/root/src/3.2/resiprocateLib/resiprocate/repro'
> > make: *** [repro] Error 2
> >
> >
> > Regards
> > Linda
> >
> >
> > On 7/21/06, Scott Godin <slgodin@xxxxxxxxxxxx > wrote:
> >
> >
> >
> >
> > You must use resiprocate stack.  If you got the sipX project from SVN,
> then the resip stuff should be checked out under the ResiprocateLib
> directory.
> >
> >
> >
> >
> >
> >
> > From: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto: resiprocate-devel-bounces@xxxxxxxxxxxxxxxxxxx ] On
> Behalf Of Linda Thomas
> > Sent: Thursday, July 20, 2006 8:05 PM
> > To: resiprocate-devel@xxxxxxxxxxxxxxxxxxx ;
> sipx-dev@xxxxxxxxxxxxxxxxxxx
> >
> >
> >
> > Subject: Re: [reSIProcate] resip error while installing boston bridge
> >
> >
> >
> >
> > Hi
> > I was trying to install the boston bridge code.
> > But as posted earlier the resip was throwing error.
> > According to my knowledge  Resiprocate consists of the Stack.
> > But as I already have the Sipxpbx which has the SipxtackLib also build in
> my system.
> > Do I still need to build Resip to properly install BBridge or BBridge can
> use the Stack of sipxtackLib.
> > Thanks
> > Linda
> >
> >
> >
> >
> > On 7/20/06, Jozsef Vass <jozsef@xxxxxxxxxxxxxxx > wrote:
> >
> >
> >
> >
> > I am also using fc 4 and gcc 4.0.2. Are you using SVN head?
> >
> >
> >
> > Jozsef
> >
> >
> >
> > ________________________________
>
> >
> > From: Linda Thomas [mailto: linda.sipx@xxxxxxxxx]
> > Sent: Wednesday, July 19, 2006 3:40 PM
> >
> >
> >
> > To: Alan Hawrylyshen
> > Cc: resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [reSIProcate] resip error while installing boston bridge
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Its fedora core 4 and gcc 4.0.1
> >
> >
> >
> >
> >
> >
> > Do i need to install gcc 3.x?
> >
> >
> >
> >
> >
> > Linda
> >
> >
> >
> >
> >
> >
> >
> > On 7/19/06, Alan Hawrylyshen < alan@xxxxxxxxxxxx > wrote:
> >
> >
> >
> >
> >
> >
> >
> > On 2006.07.19, at 13:44 , Linda Thomas wrote:
> >
> >
> >
> >
> > Can anyone guide me why is this so ?
> >
> >
> > Linda
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > What compiler version are you using? On what platform.. Please tell us
> more.
> >
> >
> >
> >
> >
> >
> > Thanks
> >
> >
> > Alan
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> _______________________________________________
> resiprocate-devel mailing list
> resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel
>
> _______________________________________________
> resiprocate-devel mailing list
> resiprocate-devel@xxxxxxxxxxxxxxxxxxx
> https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel
>
>
>