[reSIProcate] Concurrency using reSIP
David, how do achieve concurrency using resip?
I am using DUM to launch a UA but I do not want its fdset polling/select loop to block the rest of the application. When I launch fdset polling/select loop in a thread I get an exception in a file called "xtree" (some system file).
I am using C++/Visual Studio .NET 2003
Any Ideas?
PM
On Feb 22, 2005, at 10:46 AM, david Butcher wrote:
For the record, application error this time. Can't blame resip...
david
Quoting Dan Weber <dan@xxxxxxxxxxxxxx>:
From a previous email I sent, you've told me how to get the SdpContents
of a SipMessage. However, I find now when I try to do this, that it
always turns up null. Here's a copy of the sip packet traced through my
appserver.
INVITE
sip:4846991555@xxxxxxxxxxxxx:5060;ep=192.168.1.149:5060;fw=69.142.65.229
SIP/2.0
Via:SIP/2.0/UDP
192.168.0.3;branch=z9hG4bK-BroadWorks.192.168.0.3-192.168.0.128V5060-0-460495805-1109377812-1109022553976
From:"WEBER
ANNE"<sip:6102691420@xxxxxxxxxxx;user=phone>;tag=1109377812-1109022553976
To:"Dan Weber"<sip:4846991555@xxxxxxxxxxxxxxxxxx;user=phone>
Call-ID:BW1649139762102051635934371@xxxxxxxxxxx
CSeq:460495805 INVITE
Contact:<sip:192.168.0.3:5060>
Allow:ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,UPDATE,NOTIFY
Supported:100rel,timer
Min-SE:60
Accept:application/sdp,application/dtmf
Max-Forwards:70
Content-Type:application/sdp
Content-Length:263
v=0
o=BroadWorks 3847766 1 IN IP4 192.168.0.130
s=-
c=IN IP4 192.168.0.130
t=0 0
m=audio 15152 RTP/AVP 0 8 96 18 101
a=ptime:20
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-32/8000
a=rtpmap:18 G729/8000
a=rtpmap:101 telephone-event/8000
_______________________________________________
resiprocate-devel mailing list
resiprocate-devel@xxxxxxxxxxxxxxxxxxx
https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel
_______________________________________________
resiprocate-devel mailing list
resiprocate-devel@xxxxxxxxxxxxxxxxxxx
https://list.sipfoundry.org/mailman/listinfo/resiprocate-devel