[reTurn-devel] ReTurn Problem
Hi all
Scott,Thanks for your Reply
I am using reTurn as it is in SVN.I have written TCP Relay code but you
may say it is a copy of UDP relay without doing any changes .I have made
changes in RequestHandler and TurnAllocation also.
OK that may be one problem.
But Client error Which i have sent is not a Relay Problem.If I make the UDP
socket then it does not give any Read Header Problem.So I think you may
suggest something for that.
I am using Synchronous Client.
In test Application i have just changed from UDP to TCP in
CreateAllocation function.Also i am creating TCP Socket instead of UDP
socket.So it is one area where you can look into because it is giving error
in turnTcpSocket only not in UdpSocket.
Last point which you have written about setting the TCP socket to listen
also needs some explanation. For Sending or Receiving data is there any
special setup i need to make for TCP or will it work just like UDP and if
yes then what changes i need to make.
Thanks
Gurpreet Singh Sidhu
____________________________________________
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you